Scalable Green Synthesis of Robust Ultra-Microporous Hofmann Clathrate Material with Record C3H6 Storage Density for Efficient C3H6/C3H8 Separation

Developing porous materials for C₃H₆/C₃H₈ separation faces the challenge of merging excellent separation performance with high stability and easy scalability of synthesis. Herein, we report a robust Hofmann clathrate material (ZJU-75a), featuring high-density strong binding sites to achieve all the above requirements. ZJU-75a adsorbs large amount of C₃H₆ with a record high storage density of 0.818 g mL⁻¹, and concurrently shows high C₃H₆/C₃H₈ selectivity (54.2) at 296 K and 1 bar. Single-crystal structure analysis unveil that the high-density binding sites in ZJU-75a not only provide much stronger interactions with C₃H₆ but also enable the dense packing of C₃H₆. Breakthrough experiments on gas mixtures afford both high separation factor of 14.7 and large C₃H₆ uptake (2.79 mmol g⁻¹). This material is highly stable and can be easily produced at kilogram-scale using a green synthesis method, making it as a benchmark material to address major challenges for industrial C₃H₆/C₃H₈ separation.     

In Situ Polymerized 1,3-Dioxolane Electrolyte for Integrated Solid-State Lithium Batteries

Solid-state lithium batteries are promising and safe energy storage devices for mobile electronics and electric vehicles. In this work, we report a facile in situ polymerization of 1,3-dioxolane electrolytes to fabricate integrated solid-state lithium batteries. The in situ polymerization and formation of solid-state dioxolane electrolytes on interconnected carbon nanotubes (CNTs) and active materials is the key to realizing a high-performance battery with excellent interfacial contact among CNTs, active materials and electrolytes. Therefore, the electrodes could be tightly integrated into batteries through the CNTs and electrolyte. Electrons/ions enable full access to active materials in the whole electrode. Electrodes with a low resistance of 4.5 Ω □⁻¹ and high lithium-ion diffusion efficiency of 2.5×10⁻¹¹ cm² s⁻¹ can significantly improve the electrochemical kinetics. Subsequently, the batteries demonstrated high energy density, amazing charge/discharge rate and long cycle life.     

MALDI Imaging Assisted Discovery of a Di-O-glycosyltransferase from Platycodon grandiflorum Root

A matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) assisted genome mining strategy was developed for the discovery of glycosyltransferase (GT) from the root of Platycodon grandiflorum. A di-O-glycosyltransferase PgGT1 was discovered and characterized that is capable of catalyzing platycoside E (PE) synthesis through the attachment of two β-1,6-linked glucosyl residues sequentially to the glucosyl residue at the C3 position of platycodin D (PD). Although UDP-glucose is the preferred sugar donor for PgGT1, it could also utilize UDP-xylose and UDP-N-acetylglucosamine as weak donors. Residues S273, E274, and H350 played important roles in stabilizing the glucose donor and positioning the glucose in the optimal orientation for the glycosylation reaction. This study clarified two key steps involved in the biosynthetic pathway of PE and could greatly contribute to improving its industrial biotransformation.     

Bioinspired Design of a Giant [Mn86] Nanocage-Based Metal-Organic Framework with Specific CO2 Binding Pockets for Highly Selective CO2 Separation

Adsorption-based removal of carbon dioxide (CO₂) from gas mixtures has demonstrated great potential for solving energy security and environmental sustainability challenges. However, due to similar physicochemical properties between CO₂ and other gases as well as the co-adsorption behavior, the selectivity of CO₂ is severely limited in currently reported CO₂-selective sorbents. To address the challenge, we create a bioinspired design strategy and report a robust, microporous metal–organic framework (MOF) with unprecedented [Mn₈₆] nanocages. Attributed to the existence of unique enzyme-like confined pockets, strong coordination interactions and dipole-dipole interactions are generated for CO₂ molecules, resulting in only CO₂ molecules fitting in the pocket while other gas molecules are prohibited. Thus, this MOF can selectively remove CO₂ from various gas mixtures and show record-high selectivities of CO₂/CH₄ and CO₂/N₂ mixtures. Highly efficient CO₂/C₂H₂, CO₂/CH₄, and CO₂/N₂ separations are achieved, as verified by experimental breakthrough tests. This work paves a new avenue for the fabrication of adsorbents with high CO₂ selectivity and provides important guidance for designing highly effective adsorbents for gas separation.     

Boron-Dipyrromethene-Based Fluorescent Emitters Enable High-Performance Narrowband Red Organic Light-Emitting Diodes

Narrowband organic light-emitting diodes (OLEDs) are receiving significant attention and have demonstrated impressive performance in blue and green OLEDs. However, developing high-performance narrowband red OLEDs remains a highly desired yet challenging task. Herein, we have developed narrowband red fluorescent emitters by utilizing a boron-dipyrromethene (BODIPY) skeleton in combination with a methyl-shield strategy. These emitters exhibit small full-width at half-maxima (FWHM) ranging from 21 nm (0.068 eV) to 25 nm (0.081 eV) and high photoluminescence quantum yields (Φ_PL) ranging from 88.5 % to 99.0 % in toluene solution. Using BODIPY-based luminescent materials as emitters, high-performance narrowband red OLEDs have been assembled with external quantum efficiency as high as 18.3 % at 623 nm and 21.1 % at 604 nm. This work represents, to our knowledge, the first successful case of achieving NTSC pure-red OLEDs with the Commission Internationale de l’Éclairage (CIE) coordinates of [0.67, 0.33] based on conventional fluorescent emitters.     

Acidic Media Impedes Tandem Catalysis Reaction Pathways in Electrochemical CO2 Reduction

Electrochemical CO₂ reduction (CO₂R) in acidic media with Cu-based catalysts tends to suffer from lowered selectivity towards multicarbon products. This could in principle be mitigated using tandem catalysis, whereby the *CO coverage on Cu is increased by introducing a CO generating catalyst (e.g. Ag) in close proximity. Although this has seen significant success in neutral/alkaline media, here we report that such a strategy becomes impeded in acidic electrolyte. This was investigated through the co-reduction of ¹³CO₂/¹²CO mixtures using a series of Cu and CuAg catalysts. These experiments provide strong evidence for the occurrence of tandem catalysis in neutral media and its curtailment under acidic conditions. Density functional theory simulations suggest that the presence of H₃O⁺ weakens the *CO binding energy of Cu, preventing effective utilization of tandem-supplied CO. Our findings also provide other unanticipated insights into the tandem catalysis reaction pathway and important design considerations for effective CO₂R in acidic media.     

Boosting the Proton-coupled Electron Transfer via Fe−P Atomic Pair for Enhanced Electrochemical CO2 Reduction

Single-atom catalysts exhibit superior CO₂-to-CO catalytic activity, but poor kinetics of proton-coupled electron transfer (PCET) steps still limit the overall performance toward the industrial scale. Here, we constructed a Fe−P atom paired catalyst onto nitrogen doped graphitic layer (Fe₁/PNG) to accelerate PCET step. Fe₁/PNG delivers an industrial CO current of 1 A with FE_CO over 90 % at 2.5 V in a membrane-electrode assembly, overperforming the CO current of Fe₁/NG by more than 300 %. We also decrypted the synergistic effects of the P atom in the Fe−P atom pair using operando techniques and density functional theory, revealing that the P atom provides additional adsorption sites for accelerating water dissociation, boosting the hydrogenation of CO₂, and enhancing the activity of CO₂ reduction. This atom-pair catalytic strategy can modulate multiple reactants and intermediates to break through the inherent limitations of single-atom catalysts.     

Superprotonic Conductivity of MOFs Confining Zwitterionic Sulfamic Acid as Proton Source and Conducting Medium

A few metal–organic frameworks (MOFs), which typically use strong acids as proton sources, display superprotonic conductivity (≈10⁻¹ S cm⁻¹); however, they are rare due to the instability of MOFs in highly acidic conditions. For the first time, we report superprotonic conductivity using a moderately acidic guest, zwitterionic sulfamic acid (HSA), which is encapsulated in MOF-808 and MIL-101. HSA acts not only as a proton source but also as a proton-conducting medium due to its extensive hydrogen bonding ability and zwitterion effect. A new sustained concentration gradient method results in higher HSA encapsulation compared to conventional methods, producing 10HSA@MOF-808-(bSA)₂ and 8HSA@MIL-101. These MOFs show impressive superprotonic conductivity of 2.47×10⁻¹ and 3.06×10⁻¹ S cm⁻¹, respectively, at 85 °C and 98 % relative humidity, and maintain stability for 7 days.     

Activatable Type I Photosensitizer with Quenched Photosensitization Pre and Post Photodynamic Therapy

The phototoxicity of photosensitizers (PSs) pre and post photodynamic therapy (PDT), and the hypoxic tumor microenvironment are two major problems limiting the application of PDT. While activatable PSs can successfully address the PS phototoxicity pre PDT, and type I PS can generate reactive oxygen species (ROS) effectively in hypoxic environment, very limited approaches are available for addressing the phototoxicity post PDT. There is virtually no solution available to address all these issues using a single design. Herein, we propose a proof-of-concept on-demand switchable photosensitizer with quenched photosensitization pre and post PDT, which could be activated only in tumor hypoxic environment. Particularly, a hypoxia-normoxia cycling responsive type I PS TPFN-AzoCF₃ was designed to demonstrate the concept, which was further formulated into TPFN-AzoCF₃ nanoparticles (NPs) using DSPE-PEG-2000 as the encapsulation matrix. The NPs could be activated only in hypoxic tumors to generate type I ROS during PDT treatment, but remain non-toxic in normal tissues, pre or after PDT, thus minimizing side effects and improving the therapeutic effect. With promising results in in vitro and in vivo tumor treatment, this presented strategy will pave the way for the design of more on-demand switchable photosensitizers with minimized side effects in the future.